How to remove 502 from the floor?

summary

When decorating, the decorators used 502 glue to glue it. If they were not careful, it would drip on the floor, or the things on the wall would be left behind. At that time, they didn't remove it in time. Later, we found this problem ourselves. It's very difficult to remove it. How to remove 502 from the floor? Let's talk about it

How to remove 502 from the floor?

You can remove the moisture from the wood floor first. Then we can drop it directly. At this time, it should be noted that the glue surface must be completely covered. After 20 seconds, we can use the cotton swab to wipe back and forth to see if 502 glue reacts. At this time, you can generally find that he softened and returned to sticky. Then you can wipe off part of the glue with a cotton swab

Fengyoujing can help you to wash off the glue, put it on the place where there is glue, and wait for 3 to 5 minutes to wash it clean. It can't be said to wash off 100% of the glue, but it can be removed in a large area. In addition, it is to pour 502 into the place where 502 is stuck, let the new 502 melt the original 502, and then quickly wash it with water. Remember that the premise is to prepare warm water, master the time, and the speed is fast

If conditions permit, we can use gasoline, but this one is that when the skin has glue, we can use gasoline to wash it clean, rub it with gasoline, and then wash our hands clean, but the smell of gasoline is a little too big to accept, so let's forget it

matters needing attention

Take a piece of dry cloth covered with vinegar to cover the glue mark. After the glue is completely wet, it can be removed easily. With the eraser can also remove the glue on the floor, along the edge of the slowly wipe in, you can easily remove.