Notebook fever how to do

summary

If you use the notebook for a long time, you will find that it is hot when you touch it. At this time, if you don't deal with it, it is likely to turn off suddenly under long-term use. Therefore, if the notebook is hot, you can take the following measures to deal with it.

Notebook fever how to do

Method 1: turn off unused external devices and ports. Remove any peripherals that are not used temporarily, such as mobile hard disk, pcmica device, and turn off serial port, parallel port, infrared (IR) port, Bluetooth and wireless network card, which can not only save power, reduce heat, but also extend the service life of components.

Method 2: set up a reasonable power management mode, after the notebook is hot, you can also turn off unnecessary related programs to reduce its energy consumption.

Method 3: reduce the speed of the processor, can also reduce the heat. From the PIII level CPU, Intel has adopted a technology called SpeedStep, which can reduce the working voltage and operating frequency of CPU, thereby reducing power consumption and calorific value. For example, a Pentium M CPU with a frequency of 1.8GHz can be reduced to 600MHz in the battery optimization mode (or by software in the AC power mode), and the heat output of the CPU will be significantly reduced. When the notebook computer is set to the "portable / pocket" scheme, the notebook computer will better use the SpeedStep technology of Intel CPU to optimize the power management of the system, achieve the effect of cooling and power saving, and will not reduce the performance of the system. In this case, the system will automatically adjust the CPU speed to meet the requirements of the operation.

matters needing attention

After mastering the methods to deal with notebook fever, we should also pay attention to keeping the air around the notebook unobstructed when using it.